Formosa Boat Yard Ta Chiao 41

Description

Aurelia is a well-known series manufactured Formosa 41 yacht suitable for liveaboard and blue water cruising. It has a heavily build glass fibre hull (20mm) and extensive use of fine teak in both the interior and exterior.

It has a high comfort ratio as a blue water cruiser given its 4 tons of ballast and full slab keel.

This boat was stored for some 12 years under shed and coverage and refurbished for a round the world cruise but personal circumstances dictate otherwise.
It has been professionally refurbished including new steam teak deck, engine, replumb, re-rig etc to name but a few.

Electronics

VHF: Apelco 4500
VHF Hand held.
DEPTH INDICATOR: Datmarine S200DLl
GPS: Garmin GPSMAP 162
RADAR: Furuno 1621
Emergency Generator
EDatamarine Corinthian II Knot meter
Kenyon Trip Log.

Additional equipment

Mouse Sailing Dinghy
Inflatable 3.5m Zodian
Yamaha Marine grade outboard 3.5hp
6 Person Life Raft
Sea Ladder
External Cushion Seating set.

Refurbishment

Replaced engine with Volvo Penta D55 2000 hours.
New Steamed Teak Deck installed – to be sanded prior to sale
New Cutlass bearing and gland
Replumbed
Pumping tubes replaced
New head.
New Hull through and stopcocks
New rigging standing and running -1 season old
Masts Inspected stripped and re-varnished.
Install swim ladder
New Mast footing Mizzen plate
3 New Batteries
Diesel Heater Installed.
Bow pole inspected and overhauled.
Bilges cleaned and repainted.
NO Osmosis, no blisters, 3rd osmosis barrier coat applied.
Undersides, stripped back for barrier coat.

PLANS
The boat can be supplied to the customers specification, i.e. finishes and final internal layout as requested. The dated galley layout was removed and replaced with intent to allow a modular galley to be reposition in 2 other locations to suit differing boat use.
The new teak deck remains to be sanded since installation.
The charger-inverter spec to customers wishes.
Location of heater to be finalised.
Gel coat is good, however customer has the option of vinyl finish to minimise maintenance at their cost.
Anti Foul to customers colour spec.